1、Specially involved in rotating & package equipment engineering from front end studies till completion of detailed engineering with covering the following key functions；
2、Preparing and developing the equipment data sheet, specification；
3、Issuing material requisition for bidding and ordering；
4、Bid evaluation and recommendation for final ion of equipment；
5、Interface with other disciplines by providing equipment data；
6、Vendor document review；
7、Assisting in bidding and technical proposal for new project；
8、Support testing and Inspection of the Equipment at Vendor Shop；
9、Support Construction/Commissioning at project site by resolving the mechanical design issue including liaison with vendor。

1、Familiar with local and international design codes and standard including ASME, API and ANSI, ISO etc；
2、Min. 5 years working experience in rotating & package engineering；
3、Computer literate is must. Good skills at AutoCAD and Microsoft Office；
4、Good knowledge in rotating equipment (like pumps, compressors, fan and belower, vacuum system, chiller, agitator … etc.) design, fabrication, inspection and acceptance；
5、Good interpersonal and commutation skill；
6、工作地点：上海金山化工园区，全市有班车；
7、公司正式长期合同。

1、Analyse project specifications, tender and proposals requirements；
2、Contributes to the development of design parameters and methodologies；
3、Prepares technically correct, safe, environmentally friendly, cost & time effective discipline engineering analysis and solutions for approval：
4Design basis；
Technical specification；
Design scheme；
Equipment ion；
System definition；
***-hour and Cost estimation；
Prepare purchase document and ITB, review vendor document；
Good cooperate with client and vendor；
4、Provide advice, check or approval works in his fields of expertise when required. Interfaces with other engineering disciplines and design team(s)。

1、Working experiences；
2、Engineering Degree with more than 10 years of experience in design and execution of projects in onshore facilities；
3、Significant experience of team supervision and cooperation；
4、Very Familiar with Chinese standards and codes in Petrochemical and Petroleum；
5、Rich knowledge in electrical system design and calculation；
6、Good at English writing and Fluent oral English；
7、Education background；
8、Bachelor degree；
9、Knowledge / Skill；
10、Knowledge of international standards；
11、Familiar with ETAP software on short circuit analysis and protection coordination calculation；
12、Familiar with telecom design；
13、Good experience for electrical field work。

1、Ensures timely approval of engineering and requisitioning documents from the client as well as timely technical and economical definition of change orders and claims；
2、Ensures timely and qualitative preparation of technical specifications and requisitions in coordination with other disciplines；
3、Prepares lighting/earthing and lightening/power/cable tray layout；
4、Contributes to optimization of material quantities by proposing value engineering solutions；
5、Ensures contractual technical specifications are met by the suppliers；
6、Ensures proper communication with vendors and technical follow up of the orders；
7、Ensures timely internal and external reporting on engineering / requisitioning activities to the Lead；
8、Discipline Engineer/ Unit Lead Engineer；
9、Meets quality and HSE objectives of the project；
10、Provides assistant to Discipline Department Manager in various departmental activities。

1、Working experiences；
2、Engineering degree or Diploma with 3-4 years of experience in Design and execution of the projects in onshore or offshore facilities；
3、Familiar with electrical standards and codes；
4、Good at English writing and speaking；
5、Familiar with AutoCAD or equivalent software for electrical and telecom design；
6、Experience of 3D tools；
7、Education background ；
8、Bachelor degree；
9、Knowledge / Skill；
10、Field Engineering experience。

1、Ensures the qualitative design of the installation in his/her discipline in one project within contractual requirements and Technip standards and procedures in coordination with other disciplines；
2、Ensures the accuracy of the material take off；
3、Possibly supervises draftsmen；
4、Provides assistance to Discipline Department Manager in various departmental activities；
5、Manages the man-hours for sub discipline activity。

1、Technical Diploma with more than 5 years of experience or Engineering Diploma with 3 to 5 years of experience in Design and execution of the Projects in the area of onshore facilities；
2、Significant working experience in 3D modeling；
3、Skilled application of SPI design software。

Hierarchically reports to: Piping Department Manager。
Operationally reports to: Lead Discipline Engineer / Unit Lead Engineer。
1、Concept design in FEL phase and cost estimation preparation for piping, Provide the correct comments for EQP drawing of squad check, Build the walk way, operation space and maintenance space in the model, etc., Build the utility station and safety shower arrangement in the model and create the layout drawing, Create the equipment 3D model based on 2D drawing together equipment engineer and maintenance the model status which match equipment 2D drawing timely, to define the static equipment nozzle orientation to equipment engineer and vendor, Create EQP / piping 3D model in PDS and ensure to follow the latest；
2、P&ID and feedback to process if have any deviation with P&ID, Put PCT elements into lines for in-line and on-line elements based on PCT list and relevant datasheet requirement, then feedback to PCT if have any deviation, Provide clash information and positive proposal to CSA and PCT for clashing in model, Provide the ISO drawings with support type to stress calculation engineer for further calculation, and revise the routing or support type according the stress report from stress engineer, Publish the EQP layout and inform other discipline timely and regularly, Perform the special support and create the relevant drawings；
3、Prepare the heavy and big piping special support draft drawing to CSA, also provide all special support foundation drawing to CSA which CSA need to make the concrete foundation, the piping opening condition to CSA, etc.,Piping MTO preparation with right SAP number, Prepare ITB technical files and BOQ quantity for construction, Deliver high quality piping documentation including EQP, piping GA layout drawings, pressure line list, line list, special support drawings, MTO, ISO drawings, EQP nozzle orientation datasheet, etc；
4、Provide the field support during construction, such as: to modify the model during construction phase either the design change or the deviation from installation. Fulfill。

1、Engineering Diploma with more than 2 years of experience in piping design/checking of the Projects in onshore facilities；
2、Significant working experience in PDS；
3、Languages: English + Professional level；
4、Understanding the procedure of piping engineering working, Support the piping lead/sub-lead regarding piping engineering issues；
5、Equipment modeling & Piping routing design in 3D software based on P&ID, other discipline input, design standards and criteria considering economy, safety, ease of operation and maintenance；
6、Prepares piping support considering stress analysis report and support design philosophy, development special support detail drawings；
7、Preparation equipment layout, isometric, piping general arrangement and other piping deliverables；
8、工作地点：上海金山化工园区，全市有班车。

1、Overall planning of the piping prefabricating and installation work as coordination with other discipline work；
2、Review and comment or approve the construction schedule and be responsible for making sure that the required schedules are 、met；
3、Request the Piping SUBCONTRACTOR to prepare detail work procedure and review and approve this procedure including any coordination with the Discipline Manager/Leader；
4、Monitor and advise the Piping SUBCONTRACTOR(s) on the materials to ensure meeting the schedule；
5、Confirm that work complies with Quality, Safety/Health and Environment requirements and work with the Piping SUBCONTRACTOR(s) to take corrective action in case of problems；
6、Prepare daily and weekly progress construction report；
7、Responsible for compiling all the testing records and inspection report；
8、Witnessing field inspection and testing activities；
9、Reviewing the work procedures such as WPS and Hydro testing activities；
10、Involved in punching activities and ensure that in closing up to meet scheduled；
11、Responsible for line checking activities and ensure that the works as per "As Built Drawing"。

1、A degree holder in mechanical/piping engineering from recognized university or higher learning institution is preferable but at least diploma holder；
2、Preferable national register engineer；
3、At least 5 working experience in heavy construction site particular in oil and gas, petrochemical and chemical industries；
4、Good interpersonal and commutation skill；
5、Familiar with local and international construction codes and standard such as GB, SH & API is an advantages；
6、Sound knowledge in piping engineering design is an advantage, particularly local and foreign design codes and standard；
7、Experience in piping pre-commissioning activities such as pipe flushing / blowing and leaks test is a must；
8、工作地点：南京六合化工园区有班车；
9、第三方项目合同至2021年12月。

Hierarchically reports to: to Process Department Manager。
Operationally reports to: Lead Discipline Engineer / Unit Lead Engineer。
1、Analyzes project specifications, tender and proposals requirements；
2、Contributes to the development of design parameters and methodologies；
3、Prepares technically correct, safe, environmentally friendly, cost & time effective discipline engineering analysis and solutions for approval：
Design basis；
Process description；
PFD’s and heat & material balance；
MSD and material ion philosophy；
Control scheme；
Process and Utility P&ID’s；
Equipment & instrumentation Datasheet；
Utilities and chemicals consumption summaries；
Simulations and calculations；
4、Provides support to all project activities, from engineering to start-up, as required；
5、Interfaces with other process engineering disciplines and design team(s)；
6、Assists in development of a process knowledge s for studies, projects and/or operations (capturing and reporting events & experiences within studies, projects & operations and writing of technical notes)；
7、May participate in pre-commissioning, commissioning, and start-up；
8、Reports own activities within studies, projects and/or operations management。

1、Bachelor degree；
2、BS or MS in Chemical Engineering with of 10+ years as process engineer；
3、Theoretical knowledge of process design methods and tools；
4、Relevant professional registration is preferred；
5、Strong written and verbal communication skills in English；
6、工作地点：上海金山化工园区，全市有班车；
7、公司正式长期合同。

1、Specially involved in rotating & package equipment engineering from front end studies till completion of detailed engineering with covering the following key functions；
2、Preparing and developing the equipment data sheet, specification；
3、Issuing material requisition for bidding and ordering；
4、Bid evaluation and recommendation for final ion of equipment；
5、Interface with other disciplines by providing equipment data；
6、Vendor document review；
7、Assisting in bidding and technical proposal for new project；
8、Support testing and Inspection of the Equipment at Vendor Shop；
9、Support Construction/Commissioning at project site by resolving the mechanical design issue including liaison with vendor。

1、Familiar with local and international design codes and standard including ASME, API and ANSI, ISO etc；
熟悉国内外标准：ASME，API， ANSI， ISO等；
2、Min. 5 years working experience in rotating & package engineering；
至少5年动设备及成套设备设计经验；
3、Computer literate is must. Good skills at AutoCAD and Microsoft Office；
熟练使用AutoCAD和Microsoft Office 办公软件；
4、Good knowledge in rotating equipment (like pumps, compressors, fan and belower, vacuum system, chiller,agitator … etc.) design, fabrication , inspection and acceptance；
精通泵，压缩机，风机，真空系统，冷冻机，搅拌器等动设备及成套设备的设计，制造，检验和验收；
5、Good interpersonal and commutation skill；
良好的团队精神和沟通技巧；
6、Working experience in Material requisition, technical bid evaluation, vendor document review is required；
要求有材料请购， 供应商技术评估，供应商文件审查经验；
7、工作地点：上海金山化工园区，全市有班车；公司正式长期合同。

Hierarchically reports to: Piping Department Manager。
Operationally reports to: Lead Discipline Engineer / Unit Lead Engineer。
1、Concept design in FEL phase and cost estimation preparation for piping, Provide the correct comments for EQP drawing of squad check, Build the walk way, operation space and maintenance space in the model, etc., Build the utility station and safety shower arrangement in the model and create the layout drawing, Create the equipment 3D model based on 2D drawing together equipment engineer and maintenance the model status which match equipment 2D drawing timely, to define the static equipment nozzle orientation to equipment engineer and vendor, Create EQP / piping 3D model in PDS and ensure to follow the latest；
2、P&ID and feedback to process if have any deviation with P&ID, Put PCT elements into lines for in-line and on-line elements based on PCT list and relevant datasheet requirement, then feedback to PCT if have any deviation, Provide clash information and positive proposal to CSA and PCT for clashing in model, Provide the ISO drawings with support type to stress calculation engineer for further calculation, and revise the routing or support type according the stress report from stress engineer, Publish the EQP layout and inform other discipline timely and regularly, Perform the special support and create the relevant drawings；
3、Prepare the heavy and big piping special support draft drawing to CSA, also provide all special support foundation drawing to CSA which CSA need to make the concrete foundation, the piping opening condition to CSA, etc.,Piping MTO preparation with right SAP number, Prepare ITB technical files and BOQ quantity for construction, Deliver high quality piping documentation including EQP, piping GA layout drawings, pressure line list, line list, special support drawings, MTO, ISO drawings, EQP nozzle orientation datasheet, etc；
4、Provide the field support during construction, such as: to modify the model during construction phase either the design change or the deviation from installation. Fulfill。

1、Understanding the procedure of piping engineering working, Support the piping lead/sub-lead regarding piping engineering issues；
2、Equipment modeling & Piping routing design in 3D software based on P&ID, other discipline input, design standards and criteria considering economy, safety, ease of operation and maintenance；
3、Prepares piping support considering stress analysis report and support design philosophy, development special support detail drawings；
4、Preparation equipment layout, isometric, piping general arrangement and other piping deliverables；
5、Engineering Diploma with more than 2 years of experience in piping design/checking of the Projects in onshore facilities；
6、Significant working experience in PDS；
7、Languages: English + Professional level；
8、工作地点：上海金山化工园区，全市有班车。