1.Trained in the ADN project and certified as a qualified console operator for Day 1 readiness.
2.Assist RSL and APL in the preparation of operational procedures and training documents (SOP/SOC).
3.Assist RSL and APL in the training and certification of operators.
4.Participate in the DCS configuration and commission of OTS, complete the OTS training and certified.
5.Facilitate field operation inspection during construction and system hand over according to project schedule.
6.Facilitate control loop testing and interlock system testing according to the project schedule.
7.Participate in pre-commissioning and commissioning before start-up, complete the preparation of start-up.
8.Assist RSL and APL in the editing and collating of related documents.
9.Take over and hand over the DCS operations thoroughly.
10.Startup / shutdown unit safely.
11.Ensure detailed activity is captured in the Log Book.
12.Knowledge on control parameter, example Ratio control, cascade control, auto control and manual control.
13.Basic knowledge on DCS system configuration and logic, understand how to insure the control program running as design.
14.Ensure all Performance Gap and troubleshooting is captured in the logbook and Shift log. Participate preliminary root cause analysis of PGR (performance gap report) and discuss with engineers.
15.Detect process abnormality and equipment abnormality and organize field technician initiate appropriate actions to ensure the reliability.
16.Check laboratory analysis, interpret the results and take corrective actions.
17.Guide other technicians in operating the unit.
18.Able to retrieve SIS data to check on alarms and interlock trigged. Knows the Hazard protected by the Interlock. Knows the requirement to bypass Interlock.
19.Respond quickly and properly in time of emergencies.
20.Able to perform emergency shutdown as per the Emergency Procedures.
21.Coordinate between Reliability Shift Leader, Asset Performance Leader and technicians during emergency.
22.Prioritize the work according to unit strength, ability and urgency of
Train/coach junior operator.

1.Chemical industry related Secondary Technical School degree or above. College or bachelor undergraduate preferred.
2.Minimum of 5 years work experience (2 years for bachelor) in a chemical, polymer plant or oil refinery.
3.Minimum of 2 years work experience (1 years for bachelor) in DCS Operating.
4.Experience in HCN or similar high hazard chemical plants is an advantage.
5.Experience in construction/commission/start-up for a new project is an advantag.
6.Basic English communication skills is a plus.

1、参加培训并成为合格的工艺生产技术人员，遵从指定的晋升模式和进度(控制室操作及户外操作)；
2、懂得及遵守公司的安全政策及操作规程，书写工作许可证及其他的安全许可证；
3、能够与维修人员和其他工厂员工，如工艺生产工程师，环境工程师等有效沟通；
4、懂得及自我遵从环境及其他法规的要求；
5、懂得及遵从生产操作规程。确认改进生产操作规程，积极主动改变管理工艺，完善操作程序；
6、按照工艺标准和生产目的，负责操作生产设备，完成产品及质量目标；
7、阅读工艺与仪表原则流程图及其他技术文件，以便于工厂生产操作；
8、汇报事故，参与事故调查及故障分析；
9、经常性地巡检装置，检查及调节设备，以确保完善操作。例如获取温度及压力数据，调节机泵的密封冲洗，检查及加注润滑材料，开关阀门，切换机泵等等；
10、知晓装置内所有可燃气体及有毒气体探测器的位置，及当可燃气体及有毒气体探测器动作时采取相应的措施；
11、完成生产报告和记录数据，如使用规定的室外工作日志和数据表，工作任务单，以及安全工作许可证等；
12、适时地提出SAP故障系统工作任务要求；
13、保持现时，详细的知识及懂得工艺生产单元设备，单元生产操作，工艺生产原则及生产方法，以及操作相关设备带来的影响；
14、能够学习或完成基本的机修技能，例如阀门填料紧固；拆，装小件盲板；更换过滤器，震动监测等等；
15、使用系统化的工艺手段以辨别，调查和安全有效地解决问题。用以故障纠错，以及解决工艺生产中的问题；
16、服从工作指示并完成班组长可能分派的其他任务；
17、具备基本的计算机技能和资质，以完成输入数据相关的工作任务及网络基础培训；
18、具备良好的人际交流和沟通技巧，能够在团队环境中工作，致力于严格遵守安全及环境法规。

1、高中或中专以上学历；
2、至少具有在石油化工或连续性生产的化工从业5年以上工作经验；
3、具有良好的安全作业管理能力；
4、有DCS操作经验为佳；
5、有电仪、设备维修背景优先；
6、具有单元操作与生产过程操作的相关知识；
7、具备分析与解决生产工艺中的问题的技能；
8、能够从安全仪表系统中获取和解析相关资讯。